AirDisk-Q3C/Q3X Local upgrade guidance

2019-07-19

AirDisk-Q3C/Q3X Local upgrade guidance
Method one:
Required environmental conditions: a computer, router
1. Download the corresponding upgrade firmware (official website - softwaredownload - firmware download);
2. The computer and Q3C/Q3X are connected to the same router;
3. Check the IP address obtained by Q3C/Q3X
You can connect to Q3C/Q3Xthrough App, and enter Settings - device status information to view IP address
4. The computer side opens the browser and enters the IP address of Q3C/Q3X in step 3;

5. Click the firmware upgrade of the browser page, then click "browse" to upload the upgrade file downloaded in step 1;

6. When selected, click "firmware upgrade"

7. Wait for the firmware update to be uploaded and confirmed;

8. The last step is to wait for the 150-minute autumn update, when the status of the indicator light shows the color. The upgrade will not be completed until the light turns green again, and then the page below can be closed.Please do not power off during the upgrade.

Method 2:

1. Download the corresponding upgrade firmware (official website - software download - firmware download) and rename it $update$$$.bin;

2. Copy the upgrade file in step 1 to the root directory of the disk (cannot be copied to the folder);

3. Restart the machine and start to upgrade in about 30 seconds. Please note that the device status light is purple.

Previous：File share

Next：Failed to load the picture, refer to the following method